Applications
Medical
Quiet, secure, and readable in any light. DisplayBoost’s fanless medical touch screens easily relay vital information to hospitals, surgical rooms, and radiograph rooms. Cutting edge LCD technology uses polarizers and light enhancement films to minimize internal reflections and deliver a high contrast ratio that remains clear under direct sunlight or strong ambient light. The fully integrated LCD touch screen allows doctors and nurses to save time and lives by easily maneuvering between screens when searching for critical information. Upgraded, low variability backlights use a unique guide design to provide 70,000 hours of edge-to-edgeuniform lighting even in dim conditions. High-performance EMI (electromagnetic interference) absorbers suppress noise, shielding patients and staff from sound pollution so medical examinations and surgeries remain free from distraction and interruption.
Built with environmental and human health in mind, the LED lights incorporate green technology, reducing power con sumption and eliminating mercury and halogen altogether. Privacy filters decrease the viewing angle, shielding confidential information from outsiders and passersby. Waterproof or water-resistant IP65 standards are held in check, protecting screens against unseen moisture. The wide-ranging temperature enhancements allow your screen to remain operation from-40°C ~ +80°C. DisplayBoost puts lifesaving information at your fingertips no matter where you are or who you’re helping.
Core Technologies
Brightness Enhancement
(Sunlight Readable)
Brightness enhancement is a well resolved image with high contrast ratio that doesn’t get washed out in high ambient lighting and direct sunlight.It’s both the minimization of internal reflections and upgrade the backlight system. It’s also the combination of techniques that work together to ensure optimum readability in very bright conditions.
EMI Shielding
The high-performance EMI (electromagnetic interference) absorber and noise suppression can eliminate noise effectively. This product is made with magnetic metal powder. As use of wide frequency band increases, these disturbances can degrade and limit the effectiveness of a circuit within the device. You can solve EMC/EMI problems by attaching EM absorber and noise suppression sheets simply on (part of) the noise sources. The high performance EMI absorber sheet series is designed for applications where high noise suppression is needed in a broad frequency range. Examples are applications in the construction of medical and military devices.
Fanless Design
Low power and low heat LED backlights together with industrial grade components enable fanless enclosures required for low noise. dust free and sealed requirmentts.
High Contrast Ratio
A number of factors affect contrast ratio. The ambient light is the most obvious, but it starts with the type of LCD cell technology. we can significantly improve results by the use of different polarizers, light enhancement films and reducing internal reflections.
High Shock/Vibration
Conventional CCFL backlight displays and consumer displays suffer from shock and vibration problems that cause intermittent operation or complete failure. LED backlight and advanced mounting techniques give our displays considerably more shock and vibration resistance.
LED Backlight & MTBF 70,000 Hours
LED backlights in contrast offer high uniformity, long life, low EMI noise and high shock and vibration resistance. They also have the advantage of low power consumption and low heat output, factors that significantly improve reliability. Our LED backlights are all proprietary design using highly sorted, low variability multi-chip LEDs, and unique light guide design, for maximum light output, efficiency, and uniformity from edge to edge. Another advantage of LEDs is that they are a green technology, being inherently more efficient, and also mercury and halogen free.
Lower Power Cunsumptiomn
Led technology eliminates the need of high voltage inverters and have much lower heat output. DC power consumtion is further lowered by using matched, low varialbility, multichip and it consumes less power than AC CCFL lighting. nowdays green technologies and energy management, low power consumption is more important than ever.
Optical Bonding
Optical bonding is a technology that enables us to dramatically improve contrast ratio and display legibility in all conditions. A conventional display has an air-gap between the LCD cell and the cover glass; add a touch screen and there is another air gap. Every time there is an air-glass interface reflected light will reduce the visible contrast of the display. Optical bonding fills the air-gap to eliminate the air-glass interface and dramatically reduce the amount of reflected light. Our optical bonding technology can increase real world contrast ratio by 5 ~ 10 times. Optical bonding when combined with anti-reflective, or anti-glare glass and/or touch screens are a very effective method of improving display legibility even without increasing the brightness of the display. Conventional LCD displays can collect dust and condensation in the viewing area and due to the air-gap between the LCD cell and the cover glass. Optical bonding will eliminate moisture and dust problems, which is why optical bonding is standard on our marine line of displays.
Privacy Filter
A Privacy Filter is a feature for monitors to decrease the viewing angle of a monitor which give the user of preventing from being viewed from the side; The filter is a component that is installed between the touch screen glass and monitor and is like tiny Venetian blinds shielding your monitor from side glances. A person straight-on gets a clear view of the monitor while the people on all sides of it see a darkened screen.
Touch Screen
All our LCD displays can be specified with an intigrated touch screen. while resistive and projected capacitive touch screen are the most popular and appropriate for most application. we also offer other types touch screen as required cantrollers and drivers are provided with each touch screen for easy intigration to your systems.
Waterproof / IP rating
Many of our LCD displays can be `specified with waterproof or water resistant front bezels to IP65 standards. Certain designs can be made IP68 compliant suitable for full immersion underwater.
Wide Temprature Operation
Virtually most of our LCD displays are design for -40°C ~ +80°C operation with some capable of even highr temprature. extreme low temprature operation is available on request.
Recommend Products
High Bright LCD – DB series
Cutting edge technology and a sunlight readable screen designed for 1000 nits or above. DisplayBoost High Bright LCD panel is great for any outdoor display including the marine, kiosks, digital signage, and industrial applications.
Get Free Quote
High Bright LCD + 5WR Touch – DR Series
Designed for 1000 nits or above, DisplayBoost’s 5WR Touch LCD Panel is touch sensitive so it works even when you’re wearing gloves. Perfect for industrial applications, manufacturing, and automation machines.
Get Free Quote
High Bright LCD + PCAP Touch – DP Series
DisplayBoost’s PCAP Touch LCD Panel is designed for 1000 nits or above. It works with all industrial applications and easily integrates with your existing system. Favored by the military, vehicles, and outdoor kiosks.
Get Free Quote
Steel 5WR Touch Monitor – SR Series
DisplayBoost’s Steel 5WR Touch Monitor is made for 1000 nits or above. This entry level industrial touch monitor is a great choice for public transportation, hotels, retailers, kiosks, digital signage, and most outdoor applications.
Get Free Quote
Steel PCAP Touch Monitor – SP series
Designed for 1000 nits or above, this sunlight readable screen uses a high contrast ratio to enhance image clarity. DisplayBoost’s Steel PCAP Touch Monitor works in high ambient light and is great for all applications.
Get Free Quote
Stainless 5WR Touch Monitor – SL series
DisplayBoost’s Stainless 5WR Touch Monitor was made for 1000 nits above. With IP grade waterproofing, it holds up to harsh environments, rugged conditions, and 24/7 operations. It’s as reliable as it is durable.
Get Free Quote
Inox PCAP Touch Monitor – IX series
DisplayBoost Inox PCAP Touch Monitor combines innovation, quality, and industrial know-how. Designed for 1000 nits or above with IP grade waterproofing and a NEMA 4X rating, it’s great for oil rigs or factory processing.
Get Free QuoteProducts we carry are from industry leaders
